sudo apt install -y read-edid sudo /usr/bin/get-edid | /usr/bin/parse-edid
This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 8 No EDID on bus 9 2 potential busses found: 0 4 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... Checksum Correct 128-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Section "Monitor" Identifier "LA2205" ModelName "LA2205" VendorName "HWP" # Monitor Manufactured week 53 of 2009 # EDID version 1.3 # Digital Display DisplaySize 470 300 Gamma 2.20 Option "DPMS" "true" Horizsync 24-83 VertRefresh 50-76 # Maximum pixel clock is 170MHz #Not giving standard mode: 1280x960, 60Hz #Not giving standard mode: 1280x1024, 60Hz #Not giving standard mode: 1440x900, 60Hz #Not giving standard mode: 1600x1200, 60Hz #Not giving standard mode: 1680x1050, 60Hz Modeline "Mode 0" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync EndSection
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066
Mine is a bit dark (even on contrast+brightness = 100% ) I've heard that it is possible to reach inside buttons… can you confirm ?
xgamma -gamma 1.5 # poor man settings
Section "Monitor" # file://etc/X11/xorg.conf Identifier "C787" Option "DPMS" gamma 1.4 1.3 1.1 EndSection
http://applications.linux.com/article.pl?sid=05/02/07/2244242&tid=47&tid=26&tid=7
DisplaySize : V=50<160 KHz H=30<85 Hz
1600x1200: 75-60 1280x1024: 80-75 1280x768: 47.7-60 1024x768: 60Hz
Calibration Software http://www.littlecms.com/
http://freshmeat.net/projects/xgamma_applet/
http://images.google.com/images?q=mire
French http://www.le-radar.com/?mm/gimp_ch17s03.html#id2524829