HardDisk Drives are used as Mass Storage Devices ( like Disks OpticalDiskDrive )

HARDDISK

http://smartmontools.sourceforge.net/examples/TOSHIBA-0.txt

date ; uname -a #  [[RzR]]@[[AmiloA]]$
# Sun Nov 21 15:18:26 CET 2004
# Linux nrv 2.6.9-amiloa #8 Tue Nov 9 12:53:25 CET 2004 i686 GNU/Linux
sudo apt-get install smartmontools  #  [[RzR]]@[[AmiloA]]$
smartctl  -a /dev/hda
# smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
# Home page is http://smartmontools.sourceforge.net/
#
# === START OF INFORMATION SECTION ===
# Device Model:     TOSHIBA MK2018GAS
# Serial Number:    32963395A
# Firmware Version: Q2.02 A
# Device is:        Not in smartctl database [[for details use: -P showall]]
# ATA Version is:   5
# ATA Standard is:  Exact ATA specification draft version not indicated
# Local Time is:    Sun Nov 21 15:17:19 2004 CET
# SMART support is: Available - device has SMART capability.
# SMART support is: Enabled
#
# === START OF READ SMART DATA SECTION ===
# SMART overall-health self-assessment test result: PASSED
#
# General SMART Values:
# Offline data collection status:  (0x00)      Offline data collection activity
#                                      was never started.
#                                      Auto Offline Data Collection: Disabled.
# Self-test execution status:      (   0)      The previous self-test routine completed
#                                      without error or no self-test has ever
#                                      been run.
# Total time to complete Offline
# data collection:              ( 212) seconds.
# Offline data collection
# capabilities:                         (0x1b) SMART execute Offline immediate.
#                                      Auto Offline data collection on/off support.
#                                      Suspend Offline collection upon new
#                                      command.
#                                      Offline surface scan supported.
#                                      Self-test supported.
#                                      No Conveyance Self-test supported.
#                                      No Selective Self-test supported.
# SMART capabilities:            (0x0003)      Saves SMART data before entering
#                                      power-saving mode.
#                                      Supports SMART auto save timer.
# Error logging capability:        (0x01)      Error logging supported.
#                                      No General Purpose Logging support.
# Short self-test routine
# recommended polling time:     (   2) minutes.
# Extended self-test routine
# recommended polling time:     (  23) minutes.
#
# SMART Attributes Data Structure revision number: 16
# Vendor Specific SMART Attributes with Thresholds:
# ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
#   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
#   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
#   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       692
#   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1531
#   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
#   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
#   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
#   9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       9423
#  10 Spin_Retry_Count        0x0033   130   100   030    Pre-fail  Always       -       0
#  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1458
# 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       118
# 193 Load_Cycle_Count        0x0032   069   069   000    Old_age   Always       -       313892
# 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
# 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
# 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
# 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
# 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       4209
# 222 Loaded_Hours            0x0032   082   082   000    Old_age   Always       -       7284
# 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
# 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
# 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       585
# 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
#
# SMART Error Log Version: 1
# ATA Error Count: 9 (device log contains only the most recent five errors)
#      CR = Command Register [[HEX]]
#      FR = Features Register [[HEX]]
#      SC = Sector Count Register [[HEX]]
#      SN = Sector Number Register [[HEX]]
#      CL = Cylinder Low Register [[HEX]]
#      CH = Cylinder High Register [[HEX]]
#      DH = Device/Head Register [[HEX]]
#      DC = Device Command Register [[HEX]]
#      ER = Error register [[HEX]]
#      ST = Status register [[HEX]]
# Powered_Up_Time is measured from power on, and printed as
# DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
# SS=sec, and sss=millisec. It "wraps" after 49.710 days.
#
# Error 9 occurred at disk power-on lifetime: 849 hours (35 days + 9 hours)
#   When the command that caused the error occurred, the device was active or idle.
#
#   After command completion occurred, registers were:
#   ER ST SC SN CL CH DH
#   -- -- -- -- -- -- --
#   04 51 fd 01 00 00 00
#
#   Commands leading to the command that caused the error were:
#   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
#   -- -- -- -- -- -- -- --  ----------------  --------------------
#   f6 00 fe 01 00 00 00 00      00:04:18.490  SECURITY DISABLE PASSWORD
#   f6 00 ff 01 00 00 00 00      00:04:17.783  SECURITY DISABLE PASSWORD
#   f6 00 00 01 00 00 00 00      00:04:15.285  SECURITY DISABLE PASSWORD
#   ec 00 01 01 00 00 00 00      00:04:14.945  IDENTIFY DEVICE
#   | aa | aa aa ff      00:00:00.000  [[RESERVED]]
#
# Error 8 occurred at disk power-on lifetime: 849 hours (35 days + 9 hours)
#   When the command that caused the error occurred, the device was active or idle.
#
#   After command completion occurred, registers were:
#   ER ST SC SN CL CH DH
#   -- -- -- -- -- -- --
#   04 51 fe 01 00 00 00
#
#   Commands leading to the command that caused the error were:
#   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
#   -- -- -- -- -- -- -- --  ----------------  --------------------
#   f6 00 ff 01 00 00 00 00      00:04:17.783  SECURITY DISABLE PASSWORD
#   f6 00 00 01 00 00 00 00      00:04:15.285  SECURITY DISABLE PASSWORD
#   ec 00 01 01 00 00 00 00      00:04:14.945  IDENTIFY DEVICE
#   | aa | aa aa ff      00:00:00.000  [[RESERVED]]
#   ec 00 01 00 00 00 a0 00      00:04:13.580  IDENTIFY DEVICE
#
# Error 7 occurred at disk power-on lifetime: 849 hours (35 days + 9 hours)
#   When the command that caused the error occurred, the device was active or idle.
#
#   After command completion occurred, registers were:
#   ER ST SC SN CL CH DH
#   -- -- -- -- -- -- --
#   04 51 ff 01 00 00 00
#
#   Commands leading to the command that caused the error were:
#   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
#   -- -- -- -- -- -- -- --  ----------------  --------------------
#   f6 00 00 01 00 00 00 00      00:04:15.285  SECURITY DISABLE PASSWORD
#   ec 00 01 01 00 00 00 00      00:04:14.945  IDENTIFY DEVICE
#   | aa | aa aa ff      00:00:00.000  [[RESERVED]]
#   ec 00 01 00 00 00 a0 00      00:04:13.580  IDENTIFY DEVICE
#   ff ff ff ff ff ff ff 0c      00:00:00.000  [[VENDOR SPECIFIC]]
#
# Error 6 occurred at disk power-on lifetime: 366 hours (15 days + 6 hours)
#   When the command that caused the error occurred, the device was active or idle.
#
#   After command completion occurred, registers were:
#   ER ST SC SN CL CH DH
#   -- -- -- -- -- -- --
#   04 51 fd 01 00 00 00
#
#   Commands leading to the command that caused the error were:
#   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
#   -- -- -- -- -- -- -- --  ----------------  --------------------
#   f6 00 fe 01 00 00 00 00      00:00:07.710  SECURITY DISABLE PASSWORD
#   f6 00 ff 01 00 00 00 00      00:00:07.066  SECURITY DISABLE PASSWORD
#   f6 00 00 01 00 00 00 00      00:00:05.737  SECURITY DISABLE PASSWORD
#   ec 00 01 01 00 00 00 00      00:00:05.396  IDENTIFY DEVICE
#   | aa | aa aa ff      00:00:00.000  [[RESERVED]]
#
# Error 5 occurred at disk power-on lifetime: 366 hours (15 days + 6 hours)
#   When the command that caused the error occurred, the device was active or idle.
#
#   After command completion occurred, registers were:
#   ER ST SC SN CL CH DH
#   -- -- -- -- -- -- --
#   04 51 fe 01 00 00 00
#
#   Commands leading to the command that caused the error were:
#   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
#   -- -- -- -- -- -- -- --  ----------------  --------------------
#   f6 00 ff 01 00 00 00 00      00:00:07.066  SECURITY DISABLE PASSWORD
#   f6 00 00 01 00 00 00 00      00:00:05.737  SECURITY DISABLE PASSWORD
#   ec 00 01 01 00 00 00 00      00:00:05.396  IDENTIFY DEVICE
#   | aa | aa aa ff      00:00:00.000  [[RESERVED]]
#   ec 00 01 00 00 00 a0 00      00:00:03.813  IDENTIFY DEVICE
#
# SMART Self-test log structure revision number 1
# No self-tests have been logged.  [[To run self-tests, use: smartctl -t]]
#
#
# Device does not support Selective Self Tests/Logging

Previous log

Device: TOSHIBA MK2018GAS  Supports ATA Version 5
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
General Smart Values:
Off-line data collection status: (0x00)	Offline data collection activity was

never started

Self-test execution status:      (   0)	The previous self-test routine completed

without error or no self-test has ever been run

Total time to complete off-line
data collection: 		 ( 212) Seconds
Offline data collection
Capabilities: 			 (0x1b)SMART EXECUTE OFF-LINE IMMEDIATE

Automatic timer ON/OFF support Suspend Offline Collection upon new command Offline surface scan supported Self-test supported

Smart Capablilities:           (0x0003)	Saves SMART data before entering

power-saving mode Supports SMART auto save timer

Error logging capability:        (0x01)	Error logging supported
Short self-test routine
recommended polling time: 	 (   2) Minutes
self-test routine
recommended polling time: 	 (  23) Minutes
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute                    Flag     Value Worst Threshold Raw Value
(  1)Raw Read Error Rate     0x000b   100   100   050       0
(  2)Throughput Performance  0x0005   100   100   050       0
(  3)Spin Up Time            0x0027   100   100   001       964
(  4)Start Stop Count        0x0032   100   100   000       1472
(  5)Reallocated Sector Ct   0x0033   100   100   050       0
(  7)Seek Error Rate         0x000b   100   100   050       0
(  8)Seek Time Preformance   0x0005   100   100   050       0
(  9)Power On Hours          0x0032   084   084   000       6579
( 10)Spin Retry Count        0x0033   129   100   030       0
( 12)Power Cycle Count       0x0032   100   100   000       1400
(192)Power-Off Retract Count 0x0032   100   100   000       111
(193)Load Cycle Count        0x0032   085   085   000       156387
(196)Reallocated Event Count 0x0032   100   100   000       0
(197)Current Pending Sector  0x0032   100   100   000       0
(198)Offline Uncorrectable   0x0030   100   100   000       0
(199)UDMA CRC Error Count    0x0032   200   200   000       0
(220)Unknown Attribute       0x0002   100   100   000       4207
(222)Unknown Attribute       0x0032   088   088   000       4924
(223)Unknown Attribute       0x0032   100   100   000       0
(224)Unknown Attribute       0x0022   100   100   000       0
(226)Unknown Attribute       0x0026   100   100   000       594
(240)Unknown Attribute       0x0001   100   100   001       0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 04
ATA Error Count: 9
Non-Fatal Count: 0
...

202.239.72.116_3_src_1098921487971.jpg

http://www.pcnineoneone.com/howto/cleandrive5.html

www.pcnineoneone.com_howto_images_cleandrive8.jpg

drives.txt · Last modified: 2022/04/16 12:22 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki