cdrecord dev=/dev/scd0 -dao -ignsize  -speed=1  *.iso

# apt-get install k3b
# uname -a
# cdrecord -scanbus
# edit /etc/lilo/conf # append="hdc=ide-scsi"
# lilo ; reboot
# modprobe ide-scsi sg scsi_mod
# dmesg

uname -a
# Linux teuz 2.4.27-1-k7 #1 Fri Sep 3 06:21:29 UTC 2004 i686 GNU/Linux
# mkisofs -o  /home/incoming
# cdrecord dev=0,0, -dao  /tmp/out.iso
mount /dev/sr0 /mnt/tmp/

http://www.andesi.org/index.php?node=61#A8

# k3b

• http://www.tldp.org/HOWTO/CD-Writing-HOWTO-3.html#ss3.2
• http://linuxgazette.net/118/weatherwax.html

sudo apt-get install cdrdao cuetools # http://www.sf.net/projects/cdrdao/

cdrecord -v speed=4 dev=/dev/hdc -audio *.wav # make sure it fits
...
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
...
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in:  -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 46326
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
...

I wasted several Verbatim Super AZ0 chrystal cd-r 48x

root@teuz:/usr/local/src/linux-2.6.0-test11# cat .config
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.008s timeout 40s

SAMSUNG SH-S222L/BEWE lightscribe IDE

cdrecord scan
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'TSSTcorp'
Identification : 'CDDVDW SH-S222L '
Revision       : 'SB03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
wodim: No such file or directory. Cannot open 'scan'.


Feb 13 15:15:39 marcel kernel: [14480.525385] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Feb 13 15:15:39 marcel kernel: [14480.525398] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
Feb 13 15:15:39 marcel kernel: [14480.525407] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track

# for ((i=1;i<16;++i)); do mknod -m o+rw,g+rw,a-rw /dev/scd$i b 11 $i; chgrp cdrom /dev/scd$i;

Worked for me on 2.6.2

modprobe sg