Hi, I am looking to get this device, if you're selling / offer it please contact : http://rzr.online.fr/contact.htm -- 20090316
==== HARDWARE ====
* http://www.aliexpress.com/product-fm/546571245-Mele-A2000-TV-box-Allwinner-A10-hackable-device-wholesalers.html
* http://liliputing.com/2012/03/mele-a1000-is-a-70-hackable-linux-friendly-arm-based-pc.html
* http://www.roku.com/opensource
==== SET TOP BOX ====
N5000 N7000 N8000
[[OpenSource]] : http://netgem.fr/support-gpl-linux.php
* http://www.slideshare.net/gwuopl/netgem-iptv-set-top-box
* http://netgem.fr/solutions-architecture.php
MeeGo :
* http://www.cc-e.co.uk/cce/
==== Please fix my problems ====
Here is my issue :
That S100 used to work but not anymore here the details
* once the rear switch is set on the front panel goes plain red
* once the front switch is pressed , the led blinks green (x8) then blink red (x10) , green (x12) , red (x6) , { green (xN) , red(xN) } loop
* the HDD remain silent, no VGA output, no Ethernet leds
* I tried to remove the front panel and uses the micro switch but looks same
* Removed the Battery too , same
Checking Powersupply : OK
* made a jumper on green and black (ground) pins
* voltages are ok : as in http://pinouts.ru/Power/atxpower_pinout.shtml
Checking "standbye on" : KO
* there is no voltage by default except standbye
* even if i press the frontline button (the leds are blinking tough)
* if i use the jumper again on PS_ON :
* voltages are back (but nothing happend again)
* PWR_OK is 5v (while 0 whithout jumper on PS_ON)
* I noticed that HDD stop spinning when [[IDE]] cable is pluged
Is there some documentation on the boot process ?
there is no vga output (the vga mod used to work)
no bios screen
just blinking red
is it bricked ?
HANDAN BroadInfoCom No: 50-43-20C Rev. 1.0 Pb FREE
* http://www.settoplinux.org/forum/viewtopic.php?t=74
* http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-res&trurl=http%3A%2F%2Fforum.zenega-user.de%2Fviewtopic.php%3Ft%3D6783&lp=de_en&btnTrUrl=Translate
==== stb : Zenega , SMT-7020, S100 etc ====
* Zenega S100 : http://francesco.ovh.org/serveur/zenega.php 20W
* T-Online S 100 : http://wiki.freifunk-hannover.de/T-Online_S_100
* http://wiki.zenega-user.de/index.php?title=Intel-Linux#Zendeb_Anleitungen_.40SMT
* http://www.vdr-wiki.de/wiki/index.php/Zen2vdr
* http://smiley4u.free.fr/pmwiki
* http://forum.hardware.fr/hfr/OSAlternatifs/Hardware-2/multimedia-samsung-zenega-sujet_62879_1.htm
* http://linuxfr.org/~__Max__/25264.html
* https://linuxfr.org/users/__max__/journaux/un-miniserveur-pour-moins-de-50-euros
* http://www.priceminister.com/navigation/se/category/sa/kw/zenega
==== Hardware : T-Online S 100 ====
Specs:
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
* [[Hardware]] : http://wiki.zenega-user.de/index.php?title=Intel#Layout
* [[Board]] : HANDAN BroadInfoCom No: 50-43-20C Rev. 1.0 Pb FREE
* [[BIOS]] : http://ami.com
* [[Ethernet]] : eth0 Link encap:Ethernet HWaddr 00:02:FF:02:1A:84
* [[Keyboard]] : input: PS/2 Logitech Mouse as /class/input/input2
* [[Power]] Supply : [[ATX]] see [[problem]] for more
==== software ====
[[Distro]] :
* [[Debian]]
** http://wiki.mymediasystem.org/wiki/index.php/Debvision_-_A_Debian_based_Community_Distribution
** [[LiveCD]] : http://wiki.mymediasystem.org/wiki/index.php/Download_LiveCD
** http://vdr.pczett.de/index.php?dir=zendeb/
** Plain lenny
* [[slax]] is ok (ide boot) or usb if you remove the ide
* [[slak]] http://zen.htpc-forum.de/page2/page2.html
* http://wiki.openelec.tv/index.php?title=Supported_Hardware
[[Software]] :
* ntpdate
* update: mms-1.1.0 : http://MyMediaSystem.org
* mlnet
[[Software]] / MmS :
* http://www.prodeia.de/mms/source/mms_1.1.0-0prodeia2.dsc
* http://forum.mymediasystem.org/viewtopic.php?f=1&t=580
* http://mymediasystem.org/index.php?id=4
==== software : debian : lenny ====
SMT7020S:/# apt-get install debootstrap
/usr/sbin/debootstrap --arch i386 lenny /mnt/hda6
PART=hda6
mount /dev/${PART} /mnt/${PART} ; df
# /dev/hda6 16G 357M 16G 3% /mnt/hda6
cd /mnt/${PART}
t=dev ; mount --bind /$t ./$t
t=proc ; mount --bind /$t ./$t
t=sys ; mount --bind /$t ./$t
t=/dev/pts ; mount --bind /$t ./$t
chroot .
DIR=/etc/home/
mkdir -p $DIR
dpkg-query -W -f='${Package} ${VERSION}\n' | tee ${DIR}packages.txt
cp ${DIR}packages.txt ${DIR}debootstrap.txt
echo " hwclock --set --date \"$(date)\""
aptitude install grub sudo linux-image-2.6-686 linux-image-2.6.26-1-686
grep "do_initrd = yes" /etc/kernel-img.conf
sudo aptitude reinstall linux-image-2.6-686 linux-image-2.6.26-1-686
update-grub
echo "(hd0) /dev/hda" > /boot/grub/device.map
grub-install /dev/hda6
sudo aptitude clean
# sudo aptitude remove gcc-4.2-base libsasl2-2 libgnutls26 libconsole
sudo aptitude install openssh-server screen deborphan
passwd # stmdeb # ssh root@localhost # to check
dpkg-query -W -f='${Package} ${VERSION}\n' | tee ${DIR}packages.txt
sudo aptitude clean
exit
df -h # 427MB
Configure network:
hostname stb
hostname > /etc/hostname
cat < /etc/network/interfaces
auto eth0
iface eth0 inet dhcp
EOF
sudo aptitude install openssh-server screen deborphan
passwd # stmdeb or toor or rootme hackme ...
ssh root@localhost uname # to check # TODO sync keys
dpkg-query -W -f='${Package} ${VERSION}\n' | tee ${DIR}packages.txt
sudo aptitude clean
exit
df -h # 427MB
echo reboot
ssh
cat /proc/version
# Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org)
# (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP
# Sat Jan 10 18:29:31 UTC 2009
Configure Xserver :
sudo aptitude install xserver-xorg-video-intel x11-xserver-utils
DISPLAY=:0 xrandr
Configure IR :
Configure Buttons :
Configure System :
# sudo aptitude install mms
sudo dpkg -i ppa.launchpad.net/rzr-team/ppa/ubuntu/pool/main/m/mms/*_i386.deb
sudo aptitude install -f
ldd /usr/bin/mms | grep "not found"
libccext2-1.6.so.0 => not found
libccgnu2-1.6.so.0 => not found
libpcrecpp.so.0 => not found
libinotifytools.so.0 => not found
libImlib2.so.1 => not found
ToDo:
* ntpdate
autossh -CY root@stb "screen -dr || screen"
Warning: remote port forwarding failed for listen port 37281
Must be connected to a terminal.
Must be connected to a terminal.
==== software : debian : zendeb ====
/dev/sda10 7.7G 1.4G 6.0G 19% /mnt/sda10
root:smtdeb
/etc/fstab
/etc/resolv.conf
/etc/network/interfaces
dpkg-reconfigure locales
dpkg-reconfigure console-data
aptitude reinstall grub grub-common
http://www.linuxtv.org/vdrwiki/index.php/Main_Page
http://wiki.mymediasystem.org/wiki/index.php/MMS_Systems
upper usb slot is seen as sda
==== gpu : i830M ====
* [[lspci]] : 8086:3577
00:02.0 VGA compatible controller:
Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
@tag: [[i830M]]
* http://www.intel.com/support/graphics/intel830m/
* http://lists.freedesktop.org/archives/xorg/2007-May/024904.html
* http://intellinuxgraphics.org/
Hacking for [[TvOut]]
xrandr --verbose
SZ: Pixels Physical Refresh
*0 720 x 576 ( 305mm x 225mm ) *60
1 800 x 600 ( 305mm x 225mm ) 60
i810switch crt on lcd on probe
i810switch 0.6.5beta probe
i830 (ci -v -d 8086:3577) io=0xFFA80000
DCLK 0D=00021207 1D=00031406 0DS=0000888B DPLL A=D0884000 B=D08B0000
ADPA=80000000 DVO A=00000000 B=80004084 C=00000000 LVDS=00000000
DIM =00000000 DIM A=00000000 B=00000000 C=00000000 00000000
FPA 00011408 00021207 00021207 00021207
020cc=0000000C 020d8=01080108 020dc=00000108
71280=00000000 71400=8124008E
Pipe A
HTOTAL=035F02CF HBLANK=035F02CF HSYNC=033702F7
VTOTAL=027C023F VBLANK=027C023F VSYNC=025E025C
SOURCE=02CF023F CONFIG=80000000 70030=00017E5F 70080=00000000
Pipe B
HTOTAL=031F027F HBLANK=03170287 HSYNC=02EF028F
VTOTAL=020C01DF VBLANK=020401E7 VSYNC=01EB01E9
SOURCE=027F01DF CONFIG=00000000 71030=00017E5F 71080=00000000
Display plane A
CTRL=D8000000 BASE=00000000 STRIDE=00001000
Display plane B
CTRL=01000000 BASE=00000000 STRIDE=00000000
http://auffeomme.rodnoc.net/fs454/index.html
http://nixda.biz/zenega/downloads/IEGD_6_1_Linux.tgz
./IEGD_6_1_Linux/Utilities/IEGDGUI # SMT7020S
http://eesprit.free.fr/mms/zenega/xorg.conf
http://wiki.zenega-user.de/index.php?title=Xubuntu_06.10
http://www.minimyth.org/forum/viewtopic.php?p=5974
i2c black magick :
sudo aptitude install i2c-tools
modprobe -v i2c-dev
i2cdetect -l
i2c-0 smbus SMBus I801 adapter at e480 SMBus adapter
i2cset -y 0 0x4a 0x03 0xf6
# No size specified (using byte-data access)
# Error: Write failed
i2cset -y 0 0x4a 0x05 0x38
i2cset -y 0 0x4a 0x05 0x38
i2cset -y 0 0x4a 0x04 0x80
i2cset -y 0 0x4a 0x04 0x80
i2cset -y 0 0x4a 0x03 0xf6
i2cset -y 0 0x4a 0x03 0xf6
i2cset -y 0 0x4a 0x02 0x01
i2cset -y 0 0x4a 0x02 0x01
i2cset -y 0 0x4a 0x01 0x11
i2cset -y 0 0x4a 0x01 0x11
* http://forum.zenega-user.de/viewtopic.php?f=37&t=3661
==== xorg + opensource drivers ====
sudo aptitude install xserver-xorg-video-intel x11-xserver-utils
DISPLAY=:0 xrandr
Screen 0: minimum 320 x 200, current 1280 x 768, maximum 1280 x 1280
VGA connected 1280x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0
1280x768 60.0*
1024x768 60.0
800x600 60.3
640x480 59.9
DISPLAY=:0 xrandr --output S-video --set load_detection 1
X Error of failed request: 186
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 15 ()
Serial number of failed request: 15
Current serial number in output stream: 15
* http://dri.freedesktop.org/wiki/IntelRegisters
Option "MonitorLayout" "TV"
@more: [[I2C]]
* http://IntelLinuxGraphics.org ([[IRC]])
* https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/6270
* https://bugs.freedesktop.org/show_bug.cgi?id=12882#c21
==== xorg + closedsource drivers : IEGD ====
First what xserver are we running :
apt-cache show xserver-xorg | grep Version:
Version: 1:7.3+18
* http://packages.qa.debian.org/x/xorg.html
I give up , try [[ClosedSource]] drivers from [[Intel]] :
* http://support.intel.com/design/intarch/swsup/graphics_drivers.htm
# IEGD-8.0-1.i386.rpm : ./usr/X11R6/lib/modules/drivers/iegd_drv.o
zcat /usr/share/doc/IEGD-8.0/RELNOTES.txt.gz | grep "X.org version"
# X.org version 6.7, 6.8, 7.0, 7.1, & 7.2
* http://tid.ithaka.org/software/intel-embeded-graphics-driver-for-rhel-centos-5
zcat /usr/share/doc/IEGD_9.0.2/RELNOTES.txt.gz | grep -i "X.org version"
# X.org version 6.7, 6.8, 7.0, 7.1, & 7.2
# http://downloadmirror.intel.com/17376/eng/relnotes.txt
# X.org version 6.7, 6.8, 7.0, 7.1, 7.2 & 7.3
* http://downloadmirror.intel.com/16751/eng/IEGD_9_0_2_GOLD_1203.Exe
* http://forum.eeeuser.com/viewtopic.php?pid=142570
grep "X.org version" ../IEGD_9_1_1/workspace/documentation/RELNOTES.txt
# X.org version 6.7, 6.8, 7.0, 7.1, 7.2 & 7.3
TODO later :
* http://eesprit.free.fr/mms/zenega/#modules-iegd-2.6.18.tgz
==== framebuffer ====
* http://www.freevdr.de/download/index.php?dir=s100/&file=intelfb-tvout-0.1.tar.gz or [[APT]]
modprobe -v intelfb ; modprobe -v i2c_dev
fbset
mode "720x576-119"
# D: 75.002 MHz, H: 73.244 kHz, V: 119.290 Hz
geometry 720 576 1024 768 32
timings 13333 144 24 29 3 136 6
accel true
rgba 8/16,8/8,8/0,0/0
endmode
SMT7020S:~# intelfb-tvout --verbose 5 --pal-cvbs 2>&1 | tail -n 4
fs45x_reg_flk: FLK=0x0000
fs45x_reg_wss: WSS_CONFIG=0x76
fs45x_reg_wss: WSS_DATA=0x0000
ihw=1152
fbset "720x576-50"
intelfb-tvout --pal-cvbs --verbose 5
fbset "800x600-75"
intelfb-tvout --pal-cvbs --verbose 5
Finally it works using the video out cinch, I was using svideo adapter to video, but it was flicking black
modprobe -v i2c_dev ; modprobe -v intelfb
mplayer -vo help
fbset "720x576-50"
intelfb-tvout --pal --verbose 5
OPTS="-vo fbdev -vf scale=720:576"
{ sleep 15; intelfb-tvout --pal-cvbs --verbose 5 ; } &
mplayer $OPTS -playlist http://rzr.online.fr/video.m3u
fbset "800x600-75"
The image is B/W and clipped , but tvout is working ...
but not with xine :
modprobe -v i2c_dev ; modprobe -v intelfb
fbxine -h # DirectFB fb
fbset "720x576-50"
{ sleep 15; intelfb-tvout --pal-cvbs --verbose 5 ; } &
fbxine -d -D -A none ~/cache/http/rzr.free.fr.tripod.com/TrustedComputing_LAFKON_LOW.fr.mov.theora.ogg
fbset "800x600-75"
The image is back with color, but not perfect, big black rect , and some artifacts ...
ToDo
[ 382.241091] intelfb: cannot split m = 107
[ 385.612015] intelfb: ring buffer : space: 17344 wanted 65472
[ 385.612023] intelfb: lockup - turning off hardware acceleration
==== audio : ====
lspci # 8086:24c5
# 00:1f.5 Multimedia audio controller:
# Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
# AC'97 Audio Controller (rev 02)
sudo aptitude install alsa-utils
modprobe -v snd-intel8x0
fbxine -A alsa ~/cache/http/rzr.free.fr.tripod.com/TrustedComputing_LAFKON_LOW.fr.mov.theora.ogg
have to test [[spdif]]
==== InfraRed ====
http://ingeninge.homelinux.net/ingmar/zenega/Sourcen/zenegalircd_repeat.tar.gz
==== power on process ====
On poweron (through the frontpanel-button or remotecontrol) the LEDs blink green until a special sequence is send on the serial port. then it stay green. on the next keypress it blinks red until poweroff, then red. the powerbutton is not wired to the atx-pwrswitch, it goes to the IC on the fronpanel and on keypress (front-button or RC) it sends a short signal to the mainboard if it was in the off-state, or raise _and holds_ the signal HIGH to poweroff if it was powered on -- explained domi on #zenega
===== TV =====
* http://www.amlogic.com/product01.htm
===== misc =====
you can try xorg with the opensource inteldriver and the i2c tool but that had some issues when I tried it
I'm using zendeb with the IEGD driver
consumes only 9mb RAM whereas opensource intel was at 80mb or something :/
I tried directfb too, had 17% cpu load while playing fullscreen xvid but wasn't really stable for me
* http://www.smardtv.com/index.php/products
* http://fr.wikipedia.org/wiki/Kudelski
* http://www.madeo.co.uk/?p=947
====== MORE ======
@TaG: [[tv]] [[set]] [[top]] [[box]] [[fanless]] [[dvb]] [[jukebox]] [[celeron]] [[mips]] FreeBox