@related : [[AmiloA]] [[HardDisk]] [[Toshiba]] [[2inch5]] [[smart]]
MK2018GAS is the reference of [[Toshiba]] [[2inch5]] [[HardDisk]] shipped on [[AmiloA]] [[cy26]] [[Laptop]] from [[FSC]].
Quite reliable but mine failed after 5 years...
How to display the cache capacity ?
=== info ===
# dmesg
hda: TOSHIBA MK2018GAS, ATA DISK drive
# fdisk -l /dev/hda
Disk /dev/hda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Cache 2MB
* http://www3.toshiba.co.jp/storage/english/spec/hdd/mk2018gs.htm
* http://www.toshibastorage.com/techdocs/MK2018GASuserguide.pdf
==== hdparm ====
nrv:~/AmiloA-k7# hdparm -gitT /dev/hda
geometry = 38760/16/63, sectors = 39070080, start = 0
Model=TOSHIBA MK2018GAS, FwRev=Q2.02 A, SerialNo=32963395A
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39070080
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
* signifies the current active mode
Timing cached reads: 368 MB in 2.93 seconds = 125.52 MB/sec
Timing buffered disk reads: 62 MB in 3.12 seconds = 19.88 MB/sec
==== dbench ====
dbench 1
dbench version 3.04 - Copyright Andrew Tridgell 1999-2004
Running for 600 seconds with load '/usr/share/dbench/client.txt' and minimum warmup 120 secs
1 clients started
1 176 7.06 MB/sec warmup 1 sec
...
Throughput 55.3511 MB/sec 1 procs
==== smarttools ====
Updated when it crashed see [[2inch5]]
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK2018GAS
Serial Number: 32963395A
Firmware Version: Q2.02 A
User Capacity: 20,003,880,960 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Oct 3 11:18:30 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 212) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 961
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2713
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 005 005 000 Old_age Always - 38253
10 Spin_Retry_Count 0x0033 152 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2571
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 328
193 Load_Cycle_Count 0x0032 015 015 000 Old_age Always - 851358
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 4208
222 Loaded_Hours 0x0032 026 026 000 Old_age Always - 29644
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 595
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 87 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 87 occurred at disk power-on lifetime: 36986 hours (1541 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fd 01 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
f6 03 fe 01 00 00 00 00 00:02:24.278 SECURITY DISABLE PASSWORD
f6 03 ff 01 00 00 00 00 00:02:23.633 SECURITY DISABLE PASSWORD
f6 03 00 01 00 00 00 00 00:02:22.312 SECURITY DISABLE PASSWORD
ec 03 01 01 00 00 00 00 00:02:21.971 IDENTIFY DEVICE
aa aa aa aa aa aa aa ff 00:00:00.000 [RESERVED]
Error 86 occurred at disk power-on lifetime: 36986 hours (1541 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 01 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
f6 03 ff 01 00 00 00 00 00:02:23.633 SECURITY DISABLE PASSWORD
f6 03 00 01 00 00 00 00 00:02:22.312 SECURITY DISABLE PASSWORD
ec 03 01 01 00 00 00 00 00:02:21.971 IDENTIFY DEVICE
aa aa aa aa aa aa aa ff 00:00:00.000 [RESERVED]
e3 03 f1 ff 4f c2 e0 08 00:01:01.993 IDLE
Error 85 occurred at disk power-on lifetime: 36986 hours (1541 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 ff 01 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
f6 03 00 01 00 00 00 00 00:02:22.312 SECURITY DISABLE PASSWORD
ec 03 01 01 00 00 00 00 00:02:21.971 IDENTIFY DEVICE
aa aa aa aa aa aa aa ff 00:00:00.000 [RESERVED]
e3 03 f1 ff 4f c2 e0 08 00:01:01.993 IDLE
e5 03 00 ff 4f c2 e0 08 00:01:01.993 CHECK POWER MODE
Error 84 occurred at disk power-on lifetime: 34902 hours (1454 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fd 01 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
f6 03 fe 01 00 00 00 00 00:00:20.468 SECURITY DISABLE PASSWORD
f6 03 ff 01 00 00 00 00 00:00:19.838 SECURITY DISABLE PASSWORD
f6 03 00 01 00 00 00 00 00:00:18.524 SECURITY DISABLE PASSWORD
ec 03 01 01 00 00 00 00 00:00:18.183 IDENTIFY DEVICE
aa aa aa aa aa aa aa ff 00:00:00.000 [RESERVED]
Error 83 occurred at disk power-on lifetime: 34902 hours (1454 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 01 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
f6 03 ff 01 00 00 00 00 00:00:19.838 SECURITY DISABLE PASSWORD
f6 03 00 01 00 00 00 00 00:00:18.524 SECURITY DISABLE PASSWORD
ec 03 01 01 00 00 00 00 00:00:18.183 IDENTIFY DEVICE
aa aa aa aa aa aa aa ff 00:00:00.000 [RESERVED]
e3 03 f1 ff 4f c2 e0 08 00:00:07.142 IDLE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 38253 -
# 2 Short offline Completed without error 00% 23944 -
Device does not support Selective Self Tests/Logging
==== Failure ====
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset timed-out, status=0xd0
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset timed-out, status=0xd0
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset timed-out, status=0xd0
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: success