===== LIRC =====

  * https://github.com/AnaviTechnology/anavi-flex# IR transmitter (IR LED)
    * https://pinout.xyz/pinout/flex#
    * https://www.bucek.name/pdf/l-934f3bt.pdf
    * https://github.com/AnaviTechnology/anavi-flex/blob/master/RaspberryPI_Hat/docs/tsop382.pdf RX
    * https://github.com/AnaviTechnology/anavi-flex/blob/master/RaspberryPI_Hat/docs/tsal6400.pdf TX hi
    * https://github.com/AnaviTechnology/anavi-flex/blob/master/RaspberryPI_Hat/docs/Kingbright-L-934_F3BT-datasheet.pdf TX lo
  * https://github.com/aldebaran/lirc#


===== Usage =====

Using ArduinO kit remote control :

<code>
irrecord -d /dev/lirc0                


irsend LIST "tmp" ""
119800000100023c KEY_POWER

sudo irsend SEND_ONCE "tmp" KEY_POWER
hardware does not support sending
Error running command: Input/output error

TODO

sudo irsend LIST ~/tmp.lircd.conf ""
Error running command: Input/output error

sudo irsend SEND_ONCE ~/tmp.lircd.conf KEY_POWER

hardware does not support sending
Error running command: Input/output error





sudo mode2 -m -d /dev/lirc0
Using driver devinput on device /dev/lirc0
Trying device: /dev/lirc0
Using device: /dev/lirc0
Running as regular user pi
Partial read 8 bytes on /dev/lirc0


sudo irsend SEND_ONCE Samsung_00056A KEY_POWER

hardware does not support sending
Error running command: Input/output error
</code>

  * https://gist.github.com/prasanthj/c15a5298eb682bde34961c322c95378b# RPi